Category
R Series Radial Precision Lock Nut
QY936
The locking method of the R-type locking nut is forced locking by three radially equidistant locking copper pins on the outer circle. The phosphor bronze locking pins, which are machined together with the nut thread, will not deform and will not damage the thread on the shaft, maintaining the original precision even after multiple assemblies and disassemblies. The R series precision locking nuts are favored for their excellent cost-performance ratio.
Quantity:
| Lock Nut | Dimensions(mm) | Torque | |||||
| D | h | d | n×g | t | n-m | Nm | |
| RM8×0.75 | 16 | 8 | 13 | 3×3 | 1.6 | 2-M4 | 3.5 |
| RM10×0.75 | 18 | 8 | 15 | 3×3 | 1.6 | 2-M4 | 3.5 |
| RM10×1.0 | 18 | 8 | 15 | 3×3 | 1.6 | 2-M4 | 3.5 |
| RM12×1.0 | 20 | 8 | 17 | 3×3 | 1.6 | 2-M4 | 3.5 |
| RM12×1.25 | 20 | 8 | 17 | 3×3 | 1.6 | 2-M4 | 3.5 |
| RM14×1.5 | 25 | 8 | 21 | 3×3 | 2 | 2-M4 | 3.5 |
| RM15×1.0 | 25 | 8 | 21.5 | 3×3 | 2 | 2-M4 | 3.5 |
| RM16×1.5 | 28 | 10 | 24 | 3×4 | 2 | 2-M5 | 4.5 |
| RM17×1.0 | 28 | 10 | 24 | 3×4 | 2 | 2-M5 | 4.5 |
| RM18×1.5 | 30 | 10 | 26 | 3×4 | 2 | 2-M5 | 4.5 |
| RM20×1.0 | 32 | 10 | 28 | 3×4 | 2 | 3-M5 | 4.5 |
| RM20×1.5 | 32 | 10 | 28 | 3×4 | 2 | 3-M5 | 4.5 |
| RM22×1.5 | 35 | 10 | 31 | 3×4 | 2 | 3-M5 | 4.5 |
| RM24×1.5 | 38 | 12 | 34 | 3×5 | 2 | 3-M6 | 8 |
| RM25×1.5 | 38 | 12 | 34 | 3×5 | 2 | 3-M6 | 8 |
| RM27×1.5 | 42 | 12 | 38 | 3×5 | 2 | 3-M6 | 8 |
| RM30×1.0 | 45 | 12 | 41 | 3×5 | 2 | 3-M6 | 8 |
| RM30×1.5 | 45 | 12 | 41 | 3×5 | 2 | 3-M6 | 8 |
| RM33×1.5 | 50 | 12 | 48 | 3×5 | 2 | 3-M6 | 8 |
| RM35×1.5 | 52 | 12 | 48 | 3×5 | 2 | 3-M6 | 8 |
| RM36×1.5 | 55 | 14 | 50 | 3×6 | 2.5 | 3-M6 | 8 |
| RM38×1.5 | 55 | 14 | 51 | 3×6 | 2.5 | 3-M6 | 8 |
| RM39×1.5 | 58 | 14 | 53 | 3×6 | 2.5 | 3-M6 | 8 |
| RM40×1.5 | 58 | 14 | 53 | 3×6 | 2.5 | 3-M6 | 8 |
| RM42×1.5 | 62 | 14 | 57 | 3×6 | 2.5 | 3-M6 | 8 |
| RM45×1.5 | 65 | 14 | 60 | 3×6 | 2.5 | 3-M6 | 8 |
| RM48×1.5 | 68 | 14 | 63 | 3×6 | 2.5 | 3-M6 | 8 |
| RM50×1.5 | 70 | 14 | 65 | 3×6 | 2.5 | 3-M8 | 18 |
| RM52×1.5 | 73 | 16 | 67 | 3×7 | 3 | 3-M8 | 18 |
| RM55×2.0 | 75 | 16 | 69 | 3×7 | 3 | 3-M8 | 18 |
| RM56×2.0 | 77 | 16 | 71 | 3×7 | 3 | 3-M8 | 18 |
| RM60×2.0 | 80 | 16 | 74 | 3×7 | 3 | 3-M8 | 18 |
| RM64×2.0 | 85 | 16 | 79 | 3×7 | 3 | 3-M8 | 18 |
| RM65×2.0 | 85 | 16 | 79 | 3×7 | 3 | 3-M8 | 18 |
| RM68×2.0 | 92 | 18 | 85 | 3×8 | 3.5 | 3-M8 | 18 |
| RM70×2.0 | 92 | 18 | 85 | 3×8 | 3.5 | 3-M8 | 18 |
| RM72×2.0 | 95 | 18 | 88 | 3×8 | 3.5 | 3-M8 | 18 |
| RM75×2.0 | 98 | 18 | 91 | 3×8 | 3.5 | 3-M8 | 18 |
| RM76×2.0 | 100 | 18 | 93 | 3×8 | 3.5 | 3-M8 | 18 |
| RM80×2.0 | 105 | 18 | 98 | 3×8 | 3.5 | 3-M8 | 18 |
| RM85×2.0 | 110 | 18 | 103 | 6×8 | 3.5 | 3-M8 | 18 |
| RM90×2.0 | 120 | 20 | 112 | 6×10 | 4 | 3-M8 | 18 |
| RM95×2.0 | 125 | 20 | 117 | 6×10 | 4 | 3-M8 | 18 |
| RM100×2.0 | 130 | 20 | 122 | 6×10 | 4 | 3-M8 | 18 |
| RM105×2.0 | 140 | 22 | 130 | 6×12 | 5 | 3-M8 | 18 |
| RM110×2.0 | 145 | 22 | 135 | 6×12 | 5 | 3-M8 | 18 |
| RM115×2.0 | 150 | 22 | 140 | 6×12 | 5 | 3-M8 | 18 |
| RM120×2.0 | 155 | 24 | 145 | 6×12 | 5 | 3-M8 | 18 |
| RM125×2.0 | 160 | 24 | 15 | 6×12 | 5 | 3-M8 | 18 |
| RM130×2.0 | 165 | 24 | 155 | 6×12 | 5 | 3-M8 | 18 |
| RM135×2.0 | 175 | 26 | 163 | 6×14 | 6 | 3-M10 | 35 |
| RM140×2.0 | 180 | 26 | 168 | 6×14 | 6 | 3-M10 | 35 |
| RM145×2.0 | 190 | 26 | 178 | 6×14 | 6 | 3-M10 | 35 |
| RM150×2.0 | 195 | 26 | 183 | 6×14 | 6 | 3-M10 | 35 |
| RM155×3.0 | 200 | 28 | 186 | 6×16 | 7 | 3-M10 | 35 |
| RM160×3.0 | 210 | 28 | 196 | 6×16 | 7 | 3-M10 | 35 |
| RM165×3.0 | 210 | 28 | 196 | 6×16 | 7 | 3-M10 | 35 |
| RM170×3.0 | 220 | 28 | 206 | 6×16 | 7 | 3-M10 | 35 |
| RM180×3.0 | 230 | 30 | 214 | 6×18 | 8 | 3-M12 | 60 |
| RM190×3.0 | 240 | 30 | 224 | 6×18 | 8 | 3-M12 | 60 |
| RM200×3.0 | 250 | 32 | 234 | 6×18 | 8 | 3-M12 | 60 |
| RM210×3.0 | 260 | 34 | 245 | 6×18 | 8 | 3-M12 | 60 |
| RM220×3.0 | 270 | 34 | 245 | 6×18 | 8 | 3-M12 | 60 |
| RM230×4.0 | 280 | 34 | 254 | 6×18 | 8 | 3-M12 | 60 |
| RM240×4.0 | 290 | 34 | 265 | 6×18 | 8 | 3-M12 | 60 |
| RM250×4.0 | 300 | 36 | 280 | 6×18 | 8 | 3-M12 | 60 |
| RM260×4.0 | 310 | 36 | 294 | 6×18 | 8 | 3-M12 | 60 |
| RM280×4.0 | 330 | 36 | 314 | 6×18 | 8 | 3-M12 | 60 |
| RM300×4.0 | 350 | 36 | 334 | 6×18 | 8 | 3-M12 | 60 |
Recommend Products
H200 Adapter SleevesThey can be used on both plain and stepped shafts, adapter sleeves are the most widely used parts for locating bearings with a tapered bore onto a cylindrical seat. They don't need to be placed anywhere else on the shaft and are simple to install. The bearing can be positioned anywhere on a plain shaft when using it. when combined with an L-shaped spacer ring and used on stepped shafts.Accurate axial positioning of the bearing makes installation and unmounting the bearing easier.QY034Send Inquiry
H300 Adapter SleevesThey can be used on both plain and stepped shafts, adapter sleeves are the most widely used parts for locating bearings with a tapered bore onto a cylindrical seat. They don't need to be placed anywhere else on the shaft and are simple to install. The bearing can be positioned anywhere on a plain shaft when using it. when combined with an L-shaped spacer ring and used on stepped shafts.Accurate axial positioning of the bearing makes installation and unmounting the bearing easier.QY033Send Inquiry
H2300 Adapter SleevesThey can be used on both plain and stepped shafts, adapter sleeves are the most widely used parts for locating bearings with a tapered bore onto a cylindrical seat. They don't need to be placed anywhere else on the shaft and are simple to install. The bearing can be positioned anywhere on a plain shaft when using it. when combined with an L-shaped spacer ring and used on stepped shafts.Accurate axial positioning of the bearing makes installation and unmounting the bearing easier.QY032Send Inquiry
H3000 Adapter SleevesThey can be used on both plain and stepped shafts, adapter sleeves are the most widely used parts for locating bearings with a tapered bore onto a cylindrical seat. They don't need to be placed anywhere else on the shaft and are simple to install. The bearing can be positioned anywhere on a plain shaft when using it. when combined with an L-shaped spacer ring and used on stepped shafts.Accurate axial positioning of the bearing makes installation and unmounting the bearing easier.QY031Send Inquiry
Send Message